Wall Mounting The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5 - 44
4.10.1.2

Wall Mounting the Multiline Terminal

1.
2.
3.
4.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Plug line cord in the wall receptacle. Leave about
eight inches of cord and bundle the rest as shown in
Figure 5-45 Bundling the Line
Figure 5-45 Bundling the Line Cord
Ensure the Tilt Legs are in the flat (unused position).
Plug the line cord into the Multiline Terminal as
illustrated in Figure 5-46 Plugging in Line
Line In
Figure 5-46 Plugging in Line Cord
Align the two holes on the back of the multiline
terminal with the two screws on the wall plate and
slide downward (refer to
Terminal Wall on Wall Plate on page
UNIVERGE SV8100
Cord.
Cord.
Figure 5-47 Mount Multiline
5-45).