Installing Line Key Kit (12Lk-L Kit); Installing The 12Lk-L Kit - NEC Univerge SV8100 System Hardware Manual

Full-featured ip based communications system
Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
4.5
5 - 26
Installing Line Key Kit (12LK-L KIT
The 12LK-L KIT Provides twelve additional buttons to ITL or DTL multiline
terminals. The 12LK-L KIT kit:
Mounts directly to top side of terminal
Supports Red and Green LED colors
4.5.1

Installing the 12LK-L KIT

To prevent possible damage to the 12LK-L KIT or
the DTL/ITL multiline terminal during installation
or removal, disconnect the line cord/LAN cable
and the AC/DC adapter from the DTL/ITL
multiline terminal.
1.
Turn multiline terminal upside down.
Only one 12LK-L KIT can be attached to the DTL/ITL multiline
.
terminal.
2.
Pry the right-side panel from the multiline terminal.
3.
From the lower left or right corner, pry the Line Key Panel from
the multiline terminal (refer to
Key Panel on page
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
)
Figure 5-22 12LK-L Kit
Figure 5-23 Removing the Line
5-27).
UNIVERGE SV8100

Advertisement

Table of Contents
loading

Table of Contents