Connectors - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
LED Indication
Live LED Busy LED
(Green) (Red)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
4 - 40
Table 4-18 CD-8DLCA/CD-16DLCA LED Indications (Continued)
Operation Status
Normal
Operation
Unit Busy
Downloading firmware.
4.1.4

Connectors

The CNx01 connectors provide connection to four digital station
ports. With the CD-16DLCA blade, the CN101, CN201, CN301, and
CN401 connectors are available. With the CD-8DLCA blade the
CN301 and CN401connectors are removed from the blade.
Table 4-19 CD-8DLCA/CD-16DLCA/ RJ-61 Cable Connector
Pin-Outs on page 4-41
Refer to Figure 4-14 CD-8DLCA Blade on page 4-37
CD-16DLCA Blade on page 4-38
on the ESIU blades.
A Channel is busy (use
another from CH1 ~ CHx).
All channels are idle.
A Channel is busy (use
another from CH1 ~ CHx).
All channels are idle.
Any cabling to the DLCA blade must be within the
building - no outside cabling is permitted.
show the pin-outs for the RJ-61 connector.
UNIVERGE SV8100
Remarks
–
–
–
–
–
and
for the location of the connectors
Installing the SV8100 Blades
Figure 4-15