Removal Of Fpm Holder Sub Assy - Brother NV-10A Service Manual

Modules
6

Removal of FPM holder sub assy.

1. Remove the screw 1.
2. Remove the screw 2, and then remove the spring
3. Remove the retaining ring CRS-10, and then remove the FPM holder sub
assy. 1 from the base plate assy.
4. Remove the rubber 2 from the FPM holder sub assy. 1.
7
Removal of F pulse motor
1. Remove the 2 screws 1, and then remove the F pulse motor 1 from the
FPM holder sub assy. 2.
2. Remove the lead wire assy. FPM-LE 3 from the F pulse motor 1.
Feed and bobbin module
S14 .
2
S14
2
Retaining ring CRS-10
1
1
3
1
1
2
2 - 47