Fpm Holder Assy. Removal; Fpm Disassembly - Brother XR9000 Service Manual

Main unit
13

FPM holder assy. removal

1. Remove the screw 1, and then remove spring
2. Remove the screw 2, and then remove the FPM holder assy. 1.
13-1

FPM disassembly

1. Remove the lead wire assy. (FPM-LE) 1.
2. Remove the 2 screws 1, and the remove the FPM 2.
3. Remove the rubber 3.
14
Timing pulley D removal
1. Remove the 2 screws 1, and then remove timing pulley D 1.
2. Remove the retaining ring (E6), and then pull out the lower shaft bushing
2.
2 - 28
Feed unit
.
S08
1 2 1
S08
2
1
Retaining ring E6
2
1
3
1
1