Download  Print this page

Brother NV-10A Service Manual Page 35

Computerized sewing machine.
Hide thumbs

Advertisement

Main unit
4
Removal of PWSW assy.
1. 1. Remove the PWSW assy. 1 from the insulation cover 2.
*Key point
• Remove it from the backside of the insulation cover 2 while
pushing the hooks (2 locations).
5
Removal of Pin jack assy.
1. Remove the nut 1, and then remove the pin jack assy. 2 from the
insulation cover 3.
2. Remove the ferrite core 4 from the lead wire of the pin jack assy. 2.
6
Removal of Main motor sub assy.
1. Cut the band 1.
2. Remove the 2 screws 1, and then remove main motor sub assy. 2 from
the arm bed.
3. Remove the T belt 3.
6-1
Disassembly of Main motor sub assy.
1. Remove the motor fan 2 from the main motor sub assy. 1.
2. Remove the 2 screws 1, and then remove the main motor sub assy. 1
from the motor holder 4.
3. Remove the screw 2, and then remove the coaching clip 5 from the
motor holder 4.
*Key point
• Be careful not to break the wing of the motor fan 2.
2 - 18
Electrical parts and main motor
1
2
3
4
1
2
3
1
2
1
1
1
4
2
2
5

Advertisement

Table of Contents

   Related Manuals for Brother NV-10A

This manual is also suitable for:

Nv-10Ml-600B-500Ns-10Campus300Nv15 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: