Main unit
13
FPM holder assembly removal
1. Remove the screw 1, and then remove spring
2. Remove the screw 2, and then remove the FPM holder assembly 1.
13-1
FPM disassembly
1. Remove the lead wire assembly (FPM-LE) 1.
2. Remove the 2 screws 1, and the remove the FPM 2.
3. Remove the rubber 3.
14
Timing pulley D removal
1. Remove the 2 screws 1, and then remove timing pulley D 1.
2. Remove the retaining ring (E6), and then pull out the lower shaft bushing
2.
Feed unit
.
S08
1
2
1
S08
2
1
3
Retaining ring E6
2
1
1
1
2 - 25