Brother NV-10A Service Manual page 209

Special Instructions of Wiring Wiring of front cover
2. Wiring on inside of front cover
Insert the connector of the LED lead wire into
the connector of the SS-VR PCB assy.
3. Wiring of SS-VR lead wire and operation lead wire
40mm
Operation
PCB assy.
LED lead wire
Pass the LED lead wire to front
of the SS-VR PCB assy.
40mm
Operation lead wire
SS-VR PCB assy.
SS-VR PCB assy.
SS-VR lead wire
Secure the lead wires
with a band.
7 - 13