Brother NV-10A Service Manual page 24

Main unit
7-1
Disassembly of Front cover assy. (Removal of LED lamp-R)
1. Remove the connector 2 of the LED lamp-R 1 from the SSVR PCB assy.
3.
2. Remove the screw 1 , and then remove the LED lamp-R 1.
7-2
Disassembly of Front cover assy. (Removal of SSVR PCB assy.)
1. Cut the band 1.
2. Remove the 3 screws 1, and then remove the board presser 2, the
insulator sheet 3 and the SSVR PCB assy. 4.
7-3
Disassembly of Front cover assy. (Removal of Buttons)
1. Remove the SS button 1, the reverse button 2, and the NP button 3
from the front cover assy.
Main parts
2 3
1 1
1 2 3
1 1
2 3
1
3 2
4
1
2 - 7