Assembly Of Rear Cover Assy. (Attachment Of Thread Guide Supporting Plate) - Brother NV-10A Service Manual

Main unit
1-2

Assembly of Rear cover assy. (Attachment of Thread guide supporting plate)

1. Attach the thread guide supporting plate 1 to the rear cover assy. with the
screw 1.
1
1-3
Assembly of Rear cover assy. (Attachment of Spool pin)
1. Attach the spool pin 2 to the shaft of the spool pin holder assy. 1.
2. Attach the spool presser 3 to the spool pin 2.
3. Set the spool pin holder assy. 1 to the rear cover, and then attach it with
the screw 1.
*Key point
• Check that the 2 bosses 5 of the rear cover engaged with the
2 positioning holes 4 of the spool pin holder assy. 1.
1
Main parts
Taptite, Bind B
M3X12 0.39 – 0.78 N·m
Taptite, Bind B
M3X10 0.39 – 0.78 N·m
Torque
1
Torque
4
1
1 1
3 2
5 1
5
3 - 32