Brother NV-10A Service Manual page 23

Main unit
7
Removal of Front cover assy.
1. Remove the screw 1 and 2.
2. Remove the hook 1 of the front cover assy., and then remove the hooks 2
and 3 while pushing the parts of 4 and 5 (Rear cover side)
*Key point
• Be careful not to damage the hooks.
3. Remove the 2 hooks 7 from the base plate 8 while sliding the front cover
assy. to the right.
4. Remove the 2 connectors 0 from the main PCB assy. 9, and then remove
the front cover assy.
2 - 6
Main parts
1
2
4
1 2
7
8
@
9
5
3