Download  Print this page

Modules Needle-presser Module; Removal Of Presser Feed Holder Assy - Brother NV-10A Service Manual

Computerized sewing machine.
Hide thumbs

Advertisement

Modules
1

Removal of Presser feed holder assy.

1. Remove the Z foot 1.
1. Remove the screw 1, and then remove the presser feed holder assy. 2
from the presser bar 3.
2
Removal of BH switch assy.
1. Remove the screw 1, and then remove the BH switch assy. 1.
3
Removal of Thread take-up lever link
1. Remove the 2 screws 1, and then pull the take-up support shaft 1, and
then remove the washer, spring 2 and the thread take-up lever link 3.
*Key point
• Pull the thread take-up lever link 3 from the shaft of the
thread take-up lever 4.
2. Remove the retaining ring E5 from the take-up support shaft 1.
2 - 36
Needle-presser module
1
3
1
1
1
1
3
1
4
Retaining ring E5
2
1
2

Advertisement

Table of Contents

   Related Manuals for Brother NV-10A

This manual is also suitable for:

Nv-10Ml-600B-500Ns-10Campus300Nv15 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: