Removal Of Needle Holder Shaft A - Brother NV-10A Service Manual

Modules
10

Removal of Needle holder shaft A

S07
1. Remove the spring
2. Remove the screw 1, and then remove the plate 1 from the needle bar
supporter assy.
3. Remove the screw 2, and then pull the shaft 2, and then remove the
needle holder shaft A 3 from the needle bar supporter assy.
11
Removal of PF switch assy.
1. Remove the screw 1, and then remove the presser switch holder 1 from
the base holder assy.
2. Remove the PF switch assy. 2 from the presser switch holder 1.
12
Removal of Presser foot lifter
1. Remove the retaining ring E4, and then remove the presser foot lifter 1.
2 - 40
Needle-presser module
.
2 1 1 2
S07
1
1
Retaining ring E4
3
1
2
1