Removal Of Spring - Brother NV-10A Service Manual

Modules
8

Removal of Spring

S13
1. Remove the spring
9
Removal of Feed bar
1. Remove the retaining rind CS4, and then remove the polyester slider 1,
the feed bar 2 and the polyester slider 3 from the feed arm A assy.
10
Removal of Vertical adjuster screw assy.
1. Remove the vertical adjuster screw assy. 1 from the feed bar 2.
2. Remove the M5 nut 3 from the vertical adjuster screw assy. 1.
2 - 48
Feed and bobbin module
.
S13
Retaining ring CS4 2
1 3
2 3
1