Download  Print this page

Assembly Of Front Cover Assy. (attachment Of Ssvr Pcb Assy.) - Brother NV-10A Service Manual

Computerized sewing machine.
Hide thumbs

Advertisement

Main unit
3-3

Assembly of Front cover assy. (Attachment of SSVR PCB assy.)

1. Attach the SSVR PCB assy. 1 and the insulator sheet 2 to the front cover
assy. with the 2 screws 1.
2. Attach the board presser 3 to the front cover assy. with the screw 2.
*Key point
• Check that the slide volume lever 4 of the SSVR PCB assy.
1 engaged with the groove 5 of the SV key top.
• Check that the switch parts 6 (3 locations) of the SSVR PCB
assy. 1 contact the each buttons (3 locations).
3. Bind up the SSVR PCB assy. lead wire and the operation PCB assy. lead
wire with the band 7.
1
2
3-4
Assembly of Front cover assy. (Attachment of LED lamp-R)
1. Attach the LED lamp-R 1 to the front cover assy. with the screw 1.
2. Attach the connector 2 of the LED lamp-R 1 to the SSVR PCB assy. 3.
1
4
Attachment of Base plate cover
1. Attach the base plate cover 1 to the base plate with the 2 screws 1.
1
Main parts
Taptite, Bind B
M3X10
0.39 – 0.78 N·m
Taptite, Bind B
M3X12
0.39 – 0.78 N·m
Taptite, Bind B
M3X10
0.39 – 0.78 N·m
Screw, Pan (S/P washer)
0.39 – 0.78 N·m
M3X6
2
4
Torque
Torque
5
2
Torque
Torque
3
2
1
7
1
1
6
3
1
1
1
1
3 - 38

Advertisement

Table of Contents

   Related Manuals for Brother NV-10A

This manual is also suitable for:

Nv-10Ml-600B-500Ns-10Campus300Nv15 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: