Download  Print this page

Attachment Of Presser Foot Lifter - Brother NV-10A Service Manual

Computerized sewing machine.
Hide thumbs

Advertisement

Modules
9

Attachment of Presser foot lifter

1. Attach the presser foot lifter 1 to the shaft 2 of the base holder assy., and
then attach the retaining ring E4.
*Key point
• Push the presser bar clamp 3 to the upper side, and then
attach it while pushing the bottom side of the thread release
lever 4.
Apply EPNOC AP (N) 0 to the shaft of the base
holder assy.
Apply EPNOC AP (N) 0 to the operating surface of
the presser bar lifter presser bar clamp.
10
Attachment of PF switch assy.
1. Attach the PF switch assy. 1 to the presser switch holder 2.
*Key point
• Check that the boss part of the PF switch assy. 1 align the
positioning hole of the presser switch holder 2.
2. Attach the presser switch holder 2 to the base holder assy. with the screw
1.
*Key point
• Check that the boss part of the PF switch assy. 1 align the
notch part of the base holder assy.
1
3 - 47
Needle-presser module
Screw, Bind
M3X6
Small amount
XC8387***
Small amount
XC8387***
Torque
0.78 – 1.18 N·m
3
Retaining ring E4
1
2
4
1
2
1
1

Advertisement

Table of Contents

   Related Manuals for Brother NV-10A

This manual is also suitable for:

Nv-10Ml-600B-500Ns-10Campus300Nv15 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: