Brother NV-10A Service Manual page 203

Special Instructions of Wiring Wiring of power module
5. Wiring of power supply assy. and insulation cover
Insulation cover
6. Wiring of power supply assy. and insulation cover
Insulation cover
The PW SW lead wire should pass
between the boss of the insulation
cover and the outer wall.
Boss of the insulation
cover.
Insert the power lead wire into the cylinder of the
insulation cover, and attach the power supply
assy. to the insulation cover with the screw.
PW SW lead wire
Outer wall of the
insulation cover.
Boss of the insulation cover.
Power lead wire
Power supply assy.
Attach with the screw
Power supply assy.
The power lead wire should not
sandwitch between the power
supply assy. and the boss of
the insulation cover.
7 - 7