Download  Print this page

Adjustment Of Motor Belt Tension - Brother NV-10A Service Manual

Computerized sewing machine.
Hide thumbs

Advertisement

Adjustment

Adjustment of Motor belt tension

1. Remove the front cover.
2. Loosen the 2 upset screw (M4 x 12 DB) in the motor holder.
3. With a force of 0.98 N (100 g) pushing on the center of the belt, adjust the motor pulley position for a deflection
of 4 - 5 mm.
4. Tighten the 2 upset screw (M4 x 12 DB) in the motor holder. (torque : 0.78 - 1.18N · m)
XC2277001
Push-pull gauge (3 N)
0.98N (100g)
Upset screw (M4 x 12 DB)
4 - 6

Advertisement

Table of Contents

   Related Manuals for Brother NV-10A

This manual is also suitable for:

Nv-10Ml-600B-500Ns-10Campus300Nv15 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: