Removal Of Needle Bar Supporter Assy - Brother NV-10A Service Manual

Modules
7

Removal of Needle bar supporter assy.

S09
1. Remove the spring
bar supporter assy. 1 from the base holder assy.
8
Removal of Threader hook assy.
1. Remove the threader hook assy. 2 from the needle bar holder assy. 1.
*Key point
• Remove the hook part 3 of the threader hook assy. 2, and
then pull it to the lower side.
9
Removal of Zigzag adjusting nut
1. Remove the screw 1, and then remove the zigzag adjusting nut 1 from
the needle bar supporter assy.
Needle-presser module
S08
and the spring , and then remove the needle
1
S09
1
S08
3 1
2
1 1
2 - 39