Brother NV-10A Service Manual page 34

Main unit
2
Removal of Power supply assy.
1. Remove the screw 1, and then remove the insulator sheet 1.
2. Remove the screw 2, and then remove the coaching clip 2.
3. Disconnect the connectors 3 and 4.
4. Remove the 2 screws 3, and then remove the power supply assy. 6 from
the insulation cover 5.
5. Disconnect the connector 7 of the PWSW assy. and the connector 8 of
the power lead wire assy. from the power supply assy. 6.
3
Removal of Insulation cover
1. Remove the 3 screws 1, and then remove the insulation cover 1 from the
arm bed.
Electrical parts and main motor
1
1
6 3 4 3
5 3 2
7 6
1
1
2
2 - 17