Wiring Of Power Module - Brother NV-10A Service Manual

Special Instructions of Wiring Wiring of power module
1. Wiring on front side of insulation cover
Pass the FC lead wires between
the ribs (2 locations).
The ferrite core should not go
out of the broken line outside.
2. Wiring on front upper side of insulation cover
Ferrite cover
Insulation cover
Hang the FC lead
wires on the hook.
Cross the FC lead wires,
and hang it on the hook.
Hang the FC lead wire on the hook of the
insulation cover, and send it backward,
and insert it into the cylinder inside, and
pull it to the front side.
FC lead wire
Insulation
cover
7 - 5