Electrical Parts And Main Motor - Brother NV-10A Service Manual

Main unit
1
Removal of Shutter cover
1. Cut the 2 bands 1.
2. Unplug all of the connectors on the motor PCB assy. 2, and then remove
the insulator sheet 3.
3. Remove the 2 screws 1, and then remove the shutter cover 4 from the
arm bed.
1-1
Disassembly of Shutter cover (Removal of Main PCB assy.)
1. Remove the screw 1, and then remove the main PCB plate spring 1 from
the shutter cover 2.
2. Remove the main PCB assy. from the shutter cover while pushing the hook
3 to the left.
2 - 16

Electrical parts and main motor

1 4
1 1
2
3 1
2
3
1