Modules
6
Attachment of Z zigzag lever assy.
1. Attach the polyester slider 2 and the Z zigzag lever assy. 3 to the shaft 1
of the base holder assy., and then attach the retaining ring E4.
*Key point
• Check that the shaft 4 of the Z zigzag lever assy. 3 is at the
left of the Z zigzag cam 5.
2. Attach the Z lever cap 6 to the Z zigzag lever assy. 3.
Apply EPNOC AP (N) 0 to the shaft of the base
holder assy.
Apply EPNOC AP (N) 0 to the shaft of the Z
zigzag lever.
3 - 45
Needle-presser module
Bead
XC8387***
Bead
XC8387***
1
2
Retaining ring E4
3
4
5
6
3