Attachment Of Handle - Brother NV-10A Service Manual

Main unit
1

Attachment of Handle

1. Set the handle 1 to the handle holder 2, and then insert the 2 handle
shafts 3.
2. Insert the 2 polyester sliders 4 into the handle shaft 3, and then attach the
retaining ring E4.
3. Attach the handle holder 2 to the arm bed with the 2 screws 1.
1
2
Attachment of Adjusting screw assy., Base rubber A
1. Attach the 4 base rubbers A 1 to the base plate.
2. Attach the adjusting screw assy. 2 to the base plate.
Base plate and handle
Taptite, Bind S
M4X10 1.47 – 1.96 N·m
3 4
Retaining ring E4
Torque
1
2 4 3
2 2
1
1
2
3 - 3