Download  Print this page

Wiring Of Bobbin Winder Assy - Brother NV-10A Service Manual

Computerized sewing machine.
Hide thumbs


Special Instructions of Wiring Wiring of bobbin winder assy.
1. Wiring on left side of bobbin winder sub assy.
2. Wiring on front side of main body (right side of main PCB assy.)
Main PCB assy.
BW lead wire
Pass the BW lead wire to
the lower side of the FC
lead wire, and then insert
it into the connector of
the main PCB assy.
7 - 10
BW lead wire
Pull the BW lead wire from the gap on the side
of shutter cover to the sront side of main body.
Notch part of the
shutter cover
Push the BW lead
wire to all the way of
notch part.
FC lead wire
Sutter cover


Table of Contents

   Related Manuals for Brother NV-10A

This manual is also suitable for:

Nv-10Ml-600B-500Ns-10Campus300Nv15 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: