Removal Of Bobbin Winder Assy - Brother NV-10A Service Manual

Main unit
2

Removal of Bobbin winder assy.

1. Remove the 2 screws 1, and then remove the bobbin winder assy. 1.
2-1
Disassembly of Bobbin winder assy. (Removal of SW assy : BW-F)
1. Undo the hooks 1 (2 locations), and then remove SW assy : BW-F 2
from the bobbin winder assy. 3.
2-2
Disassembly of Bobbin winder assy. (Removal of BW shaft holder assy.)
1. Open the bobbin winder assy.
2. Remove the spring S01
3. Remove the BW shaft holder assy. 1 from the bobbin winder assy. holder
2.
4. Remove the bobbin winder shaft spring 3 from the BW shaft holder assy.
1.
5. Remove the rubber ring 4 from the BW shaft holder assy. 1.
2 - 24
Bobbin winder mechanism
.
1 1
1
2 3
2
S01
1
3
4 1