Brother NV-10A Service Manual page 29

Main unit
9
Removal of Rear cover assy.
1. Remove the 2 screws 1.
2. Remove the hook 1, and then remove the rear cover assy. 2 from the arm
bed.
*Key point
• Check that the section 3 get over the presser lever 4.
• Be careful not to break the wing of the motor fan.
9-1
Disassembly of Rear cover assy. (Removal of Bobbin presser)
1. Remove the screw 1, and then remove the bobbin presser 1 and the nut 1
M3 2.
2 - 12
Main parts
2 1
1
1 2
1 1
2
3
4