Attachment Of Needle Plate Supporter Shaft B - Brother NV-10A Service Manual

Modules Feed and bobbin module
10

Attachment of Needle plate supporter shaft B

2 1
1. Attach the feed arm supporter 2 to the needle plate supporter shaft B 1.
*Key point
• Check that the hook part 3 of the feed arm supporter 2 is the
lower side.
2. Attach the needle plate supporter shaft B 1 to the base plate assy.
3. Attach the nut 1 M3 4 to the needle plate supporter shaft B 1.
4. Hang the hook part 3 of the feed arm supporter 2 on the base plate assy.
3
3
4 1
3 - 60