Attachment Of Insulation Cover - Brother NV-10A Service Manual

Main unit
4

Attachment of Insulation cover

1. Attach the insulation cover 1 to the arm bed with the 3 screws 1.
1
5
Attachment of Power supply assy.
1. Attach the connector 1 to the power supply assy. 2.
2. Attach the power supply assy. 2 to the insulation cover 3 with the 2
screws 1.
3. Attach the connector 4 and the connector 5 to the power supply assy. 2.
4. Attach the coaching clip 6 to the insulation cover 3 with the screw 2.
*Key point
• Attach the ferrite core 7 with the coaching clip 6.
5. Attach the insulator sheet 8 to the insulation cover 3 with the screw 3.
1
2
3
Electrical parts and main motor
Screw, Bind
M4X8
1.18 – 1.57 N·m
Taptite, Bind B
M3X10
0.39 – 0.78 N·m
1
Torque
1 4
2
Torque
3
1
1 2
1 6
5 2 7
8 3
3 - 25