To Remove The Plastic Envelope; To Fit The Ramp - Sun Microsystems Datacenter Switch 3456 Installation Manual

6. Remove the documentation and shipping kit from the pallet.

▼ To Remove the Plastic Envelope

●
Using the scissors, carefully cut the plastic envelope around the perimeter of
the chassis at the base.
See
FIGURE 5-6
Cutting the Plastic Envelope
FIGURE 5-6
Note – Pull out on the envelope as you cut, so that you do not damage the chassis
surface.

▼ To Fit the Ramp

●
Attach the ramps to the side of the pallet
See
FIGURE 5-7
Note – Ensure that the guides on the ramps are towards the center.
.
.
Chapter 5 Unpacking the Chassis 29