Diligent Attitude; Installation And Maintenance Tools; Standard Tools - Sun Microsystems Datacenter Switch 3456 Installation Manual

Any situation that doesn't look right, operation that doesn't function smoothly, or
behavior that is not as expected, must be investigated immediately.
Check and recheck your work. Unknowingly making a mistake yet correcting it is
permissible and good practice. Covering up a known uncertainty can cause serious
damage.

Diligent Attitude

Many of the procedures for installation might require repeated efforts. There might
be situations that mean undoing tasks that were accomplished hours ago. The
personnel installing the Sun Datacenter Switch 3456 must realize the importance of
correctly installing the switch.

Installation and Maintenance Tools

This section lists the tools to be used for the installation.

Standard Tools

describes the tools required for the installation and maintenance of the Sun
TABLE 3-2
Datacenter Switch 3456.
Standard Tools for Installation
TABLE 3-2
Tool Purpose
Socket extension Extends reach of socket to the line and fabric cards, especially when the
Sun Datacenter Switch 3456 is fully configured.
Socket Inserts and ejects line and fabric cards from the chassis.
Ratchet Drives the socket and extension.
Claw hammer For uncrating the chassis.
Small needle For straightening bent pins and handling small items.
nose pliers
Phillips To tighten and loosen Phillips screws.
screwdrivers
Flat-blade To pry klimp fasteners and for basic utility.
screwdrivers
Chapter 3 Preparing for Installation 21