Receiving Area; Equipment; Cleanliness; Personnel - Sun Microsystems Datacenter Switch 3456 Installation Manual

Table of Contents

Receiving Area

This section lists the equipment used in the receiving area or loading dock and the

condition and state of the area.

To receive and unpack the Sun Datacenter Switch 3456, the following equipment is

required.

Forklift or pallet jack rated for at least 2000 lbs

■

Large flat-blade screwdrivers (one for each person unpacking)

■

Claw hammer (one for each person unpacking)

■

Adjustable wrench (two for each person unpacking)

■

Scissors

■

Gloves (for each person unpacking)

■

Bin for parts collection

■

The unpacking area must be clean and uncluttered. Personnel will be working

closely and activity. The personnel must be free to move about without distraction or

the possibility of tripping or slipping.

The task of unpacking produces packing material waste and wood shavings. This

debris should be removed and swept away before the chassis is rolled out.

After rollout, the crate can be reassembled and stored. The unpacking area should be

swept again.

This section describes the personnel needed for the installation, what their tasks are,

and their mindset.

Sun Datacenter Switch 3456 Installation Guide • December 2008

Table of Contents

Do you have a question about the Datacenter Switch 3456 and is the answer not in the manual?