Table of Contents
Advertisement
8 mm
Hexagon
Wrench
25.
REMOVE CYLINDER BLOCK WATER DRAIN COCK SUB−ASSY
SST
1CD−FTV ENGINE REPAIR MANUAL (RM1046E)
−
ENGINE MECHANICAL
PARTIAL ENGINE ASSY (1CD−FTV)(From September,
2003)
23.
REMOVE ENGINE REAR OIL SEAL RETAINER
(a)
Remove the 6 bolts.
(b)
Using a screwdriver, remove the oil seal retainer by prying
between the oil seal retainer and main bearing cap.
NOTICE:
Be careful not to damage the oil seal retainer and main
bearing cap.
A09518
24.
REMOVE OIL CHECK VALVE SUB−ASSY
(a)
Using an 8 mm hexagon wrench, remove the check valve
and gasket.
A09519
26.
REMOVE CAMSHAFT OIL SEAL
(a)
Using a screwdriver and hammer, tap out the oil seal.
A09619
27.
INSTALL CAMSHAFT OIL SEAL
(a)
Using SST and a hammer, tap in a new oil seal until its sur-
face is flush with the camshaft oil seal retainer edge.
SST
(b)
Apply multipurpose grease to a new oil seal lip.
NOTICE:
Keep the lip free of foreign objects.
A09620
09223−46011
14−9
Advertisement
Table of Contents
