Standard Toolkit - ABB IRB 360/3 Product Manual

7 Reference information

7.6. Standard toolkit

7.6. Standard toolkit
General
All service (repairs, maintenance and installation) procedures contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools that are
considered standard are gathered in the Standard toolkit and defined in the table below.
This way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
1
196
Tool
Ring-open-end spanner 7-35mm
Socket head cap 3, 5, 8 mm
Torque wrench 4-33 Nm
Small screwdriver
Plastic mallet
Ratchet head for torque wrench 1/2
Cut-off pliers
90° angled bit holder
Spirit level
3HAC030005-001 Revision: -