Table of Contents
Advertisement
7.3. Applicable safety standards
Standards, general
The robot is designed in accordance with the requirements of:
Standards, safety fence
The following standards are applicable to the safety fence surrounding the robot cell:
Standards, robot cell
The following standards are applicable when the robot is part of a robot cell:
3HAC030005-001 Revision: -
•
EN ISO 10218-1: 2006 Robots for industrial environments of machines - Safety
requirements - Part 1 Robot
•
ANSI/RIA 15.06-1999
•
ISO/DIS 11161, Industrial automation systems - safety of integrated manufacturing
systems - Basic requirements
•
ISO 11161, Industrial automation systems -safety of integrated manufacturing systems
- Basic requirements
•
prEN 999 Safety of machinery - The positioning of protective equipment in respect of
approach speeds of the human body.
•
EN 294, Safety of machinery - Safety distance to prevent danger zones being reached
by the upper limbs.
•
EN 349, Safety of machinery - Minimum gaps to avoid crushing of parts of the human
body.
•
EN 811 Safety of machinery - Safety distance to prevent danger zones being reached
by the lower limbs.
•
Pr EN 999 Safety of machinery - The positioning of protective equipment in respect
of approach speeds of the human body.
•
EN 1088 Safety of machinery - Interlocking device associated with guards principles
for design and selection.
7 Reference information
7.3. Applicable safety standards
193
Advertisement
Table of Contents
