Table of Contents
Advertisement
5.3. Calibration movement directions for all axes
Overview
When calibrating, the axis must consistently be run towards the calibration position in the
same direction, in order to avoid position errors caused by backlash in gears etc. Positive
directions are shown in the figure below.
Calibration movement and Jogging directions
The figure below shows the positive and negative directions for each axis and the linear
directions when jogging the robot
xx0700000448
3HAC030005-001 Revision: -
5 Calibration information
5.3. Calibration movement directions for all axes
173
Advertisement
Table of Contents
