2.3 Unpacking
2.3.1. Weight specifications
Definition
In installation, repair and maintenance procedures, weights of the components handled are
sometimes specified. All components exceeding 22 kg (50 lbs) are high-lighted in this way.
To avoid injury, ABB recommends the use of lifting equipment when handling components
with a weight exceeding 22 kg. A wide range of lifting tools and devices are available for each
manipulator model.
Example
Below is an example of how a weight specification is presented, inside a procedure table:
3HAC030005-001 Revision: -
Action
CAUTION!
The motor weighs 32 kg! All lifting equipment used
must be sized accordingly!
2 Installation and Commissioning
2.3.1. Weight specifications
Note
31