Web Interface: Configure Gvrp On Switch B - NETGEAR M4200 Software Administration Manual

c. From the Port GVRP Mode menu, select Enable.
d. Click Apply.

Web Interface: Configure GVRP on Switch B

1. Enable GVRP globally:
a. Select Switching > VLAN > Advanced > GARP Switch Configuration.
A screen similar to the following displays.
b. Next to GVRP Mode, select the Enable radio button.
c. Click Apply.
2. Enable GVRP on port 1/0/11:
a. Select Switching > VLAN > Advanced > GARP Port Configuration.
A screen similar to the following displays.
Managed Switches
VLANs
51