NETGEAR M4200 Software Administration Manual page 578

b. Scroll down and select the Interface 1/0/21, 1/0/22, and 1/0/24 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
11. Enable IGMP globally.
a. Select Routing > Multicast > IGMP > Global Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
12. Enable IGMP on interface 1/0/24.
a. Select Routing > Multicast > IGMP > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 1/0/24 check box.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
Managed Switches
PIM
578