Web Interface: Configure MLD Snooping
1.
Create VLAN 300.
a. Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 300.
c. Click Add.
2.
Assign all of the ports to VLAN 300.
a. Select Switching > VLAN > Advanced > VLAN Membership.
A screen similar to the following displays.
b. In the VLAN ID list, select 300.
c. Click Unit 1. The ports display.
d. Click the gray boxes under ports 1 and 24 until U displays.
The U specifies that the egress packet is untagged for the port.
e. Click Apply.
3.
Assign PVID to ports 1/0/1 and 1/0/24.
a. Select Switching > VLAN > Advanced > Port PVID Configuration.
Managed Switches
MLD
638