NETGEAR M4200 Software Administration Manual page 634

A screen similar to the following displays.
b. In the Router ID field, enter 2.2.2.2.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
7. Enable OSPFv3 on interfaces 1/0/21 and 1/0/24.
a. Select Routing > OSPFv3 > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Under OSPFv3 Interface Configuration, scroll down and select the Interface 1/0/21
and 1/0/24 check boxes.
c. In the OSPFv3 Interface Configuration, in the Admin Mode field, select Enable.
d. Click Apply to save the settings.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
Managed Switches
MLD
634