NETGEAR M4200 Software Administration Manual page 183
M4200 and m4300 series prosafe managed switches
Hide thumbs
Also See for M4200:
- Hardware installation manual (33 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
b. Under Configure Routes, make the following selections and enter the following
information:
•
Select Static in the Route Type field.
•
In the Network Address field, enter 192.168.100.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.1.
c. Click Add.
5.
Create a static route with IP address 192.168.30.0/24:
a. Select Routing > Routing Table > Basic > Route Configuration.
A screen similar to the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
•
In the Route Type field, select Static.
•
In the Network Address field, enter 192.168.30.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.1.
c. Click Add.
Managed Switches
ACLs
183
Hide quick links:
Advertisement
Table of Contents
