NETGEAR M4200 Software Administration Manual page 357

2. Change the authentication mode for Telnet users to RADIUS.
(Netgear Switch)(Config)#aaa authentication login networkList radius
3. Verify that RADIUS authentication is set up for Telnet users.
(Netgear Switch) #show authentication methods
Login Authentication Method Lists
---------------------------------
defaultList :
networkList :
Enable Authentication Method Lists
----------------------------------
enableList :
enableNetList :
Line Login Method List
------- -----------------
Console defaultList
Telnet networkList
SSH networkList
HTTPS :local
HTTP :local
DOT1X :
4. Create a command authorization list and configure RADIUS as the authorization.
(Netgear Switch)(Config)# aaa authorization commands commandList radius
5. Configure command authorization list for Telnet.
Netgear Switch) (Config)#line telnet
(Netgear Switch) (Config-telnet)#authorization commands commandList
(Netgear Switch) (Config-telnet)#exit
Managed Switches
local
radius
enable none
enable none
Enable Method List
------------------
enableList
enableList
enableList
Security Management
357