d. Click the gray boxes under ports 13 and 25 until T displays.
The T specifies that the egress packet is tagged for the port.
e. Click Apply.
3.
Create a class class_vlan:
a. Select QoS > DiffServ > Advanced > Class Configuration.
A screen similar to the following displays.
b. Enter the following information:
•
In the Class Name field, enter class_vlan.
•
In the Class Type list, select All.
c. Click Add to create a new class class_vlan.
A screen similar to the following displays.
d. Click class_vlan to configure this class.
Managed Switches
DiffServ
271