NETGEAR M4200 Software Administration Manual page 331

A screen similar to the following displays.
b. Select the defaultList check box.
c. In the 1 list, select RADIUS.
d. Click Add.
6. Configure the RADIUS authentication server.
a. Select Security > Management Security > Radius > Server Configuration.
A screen similar to the following displays.
b. In the Radius Server IP Address field, enter 192.168.0.1.
c. In the Secret Configured field, select Yes.
d. In the Secret field, enter 12345.
e. Click Add.
Managed Switches
Security Management
331