NETGEAR M4200 Software Administration Manual page 490

3. On the DHCPv6 relay, configure the interface that is connected to the DHCPv6 client.
(Netgear Switch) #vlan data
(Netgear Switch) (Vlan)#vlan 2
(Netgear Switch) (Vlan)#vlan routing 2
(Netgear Switch) (Vlan)#exit
(Netgear Switch) (Config)#interface vlan 2
(Netgear Switch) (Interface vlan 2)#ipv6 address 2001:2::1/64
(Netgear Switch) (Interface vlan 2)#ipv6 dhcp relay destination 2001:1::2
(Netgear Switch) (Interface vlan 2)#ipv6 enable
(Netgear Switch) (Interface vlan 2)#exit
(Netgear Switch) (Config)#interface 1/0/19
(Netgear Switch) (Interface 1/0/19)#vlan pvid 2
(Netgear Switch) (Interface 1/0/19)#vlan participation include 2
(Netgear Switch) (Interface 1/0/19)#ipv6 enable
(Netgear Switch) (Interface 1/0/19)#exit
4. Enable DHCPv6.
(Netgear Switch) (Config)#service dhcpv6
5. Display the DHCPv6 binding information.
(Netgear Switch) #show ipv6 dhcp binding
Total number of bindings : 1
Client Address................................. fe80::6458:f6b:e2b:a0c3
Client Interface............................... vlan 2
Client DUID....................................
00:01:00:01:1d:c5:22:15:00:21:cc:70:0b:bf
Identity Association ID........................ 83894732
Binding Prefix Address......................... 2001:2::1
Binding Prefix Type ........................... IA_NA
Binding Expiration (secs)...................... 4294967255
Binding Prefix Valid Lifetime (secs)........... infinite
Binding Prefix Preferred Lifetime (secs)....... infinite
Managed Switches
DHCPv6 Server
490