NETGEAR M4200 Software Administration Manual page 485

A screen similar to the following displays.
b. Select the 1/0/1 check box to the left of the Interface column.
1/0/1 displays in the Interface field of the table heading.
c. In the IPv6 Mode field, select Enable.
d. In the Routing Mode field, select Enable.
e. Click Apply to save the settings.
3. Configure the IPv6 address on interface 1/0/1.
a. Select Routing > IPv6 > Advanced > Prefix Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/1.
c. In the IPv6 Prefix field, enter 2001:1:2::1.
d. In the Length field, enter 64.
e. In the EUI64 field, select Disable.
f. Click Add.
4. Enable the DHCPv6 service.
a. Select System > Services > DHCPv6 Server > DHCPv6 Server Configuration.
Managed Switches
DHCPv6 Server
485