c. Click Apply to save the settings.
7.
Enable OSPF on port 1/0/3.
a. Select Routing > OSPF > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Under Interface Configuration, scroll down and select the interface 1/0/3 check box.
Now 1/0/3 appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.3.
•
In the OSPF Admin Mode field, select Enable.
•
In the Priority field, enter 255.
•
In the Metric Cost field, enter 64.
c. Click Apply to save the settings.
8.
Enable OSPF on port 1/0/4.
a. Select Routing > OSPF > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Under Interface Configuration, scroll down and select the interface 1/0/4 check box.
Managed Switches
OSPF
113