NETGEAR M4200 Software Administration Manual page 295

3. Enable MVR and multicast VLAN
a. Select Switching > MVR > Basic > MVR Configuration.
A screen similar to the following displays.
b. For MVR Running, select Enable.
c. In the MVR Multicast VLAN field, enter 999.
d. Click Apply.
4. Add multicast group 224.1.2.3 to MVR.
a. Select Switching > MVR > Basic > MVR Group Configuration.
A screen similar to the following displays.
b. In the MVR Group IP field, enter 224.1.2.3.
c. Click Add.
5. Configure a receiver on interface 0/1, 0/5, and 0/7.
a. Select Switching > MVR > Basic > MVR Interface Configuration.
Managed Switches
MVR
295