NETGEAR M4200 Software Administration Manual page 476

A screen similar to the following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply to save the settings.
3. Enable IPv6 address on interface 1/0/9.
a. Select Routing > IPv6 > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 1/0/9 check box to the left of the Interface
column.
1/0/9 displays in the Interface field of the table heading.
c. Enter the following information:
• In the IPv6 Mode field, select Enable.
• In the Routing Mode field, select Enable.
d. Click Apply to apply the settings.
4. Configure the prefix on interface 1/0/9.
a. Select Routing > IPv6 > Advanced > Prefix Configuration.
Managed Switches
DHCPv6 Server
476